Cadillac CTS-V GEN2 2009-12 Air Intake

D3 Air Intake for CTS-V

D3 Air Intake for CTS-V

 

 

 

 

The D3 Air Intake is designed not only to look good, but to also makes real world hose power. This is why the D3 Air Intake has become a staple product in all of D3′s performance builds.

The D3 Air Intake is the first complete air intake for the 2009-2011 Cadillac CTS-V as well as the first to feature a true ø102mm Non-Tapered mandrel bent intake pipe with all external MAF & PCV Interfaces. The D3 Intake for CTS-V features an all-aluminum construction, Laser Cut MAF Interface Plate, Genuine K&N Air Filter, and a 1pc aluminum heat shield when combined offer a phenomenal bolt on ~20HP or upwards of ~50HP when calibrated through dyno tuning.

Installation is a breeze and can be accomplished with simple hand tools. The D3 Intake is a complete replacement solution to the OEM airbox. The MAF interface has been laser cut to allow for 100% perfect mating of both positioning and interfacing of the MAF to the new intake pipe. The heat shield features a simple to install 1pc construction allowing it to dropped in with no assembly.

Note: The D3 Air Intake seen an average gain of +35 HP. ECU Mapping will be required due to the significant increase in air flow. If you do not wish to map the ECU then D3 recommends the use of the SOUNDPIPE Intake

Features:

  • Meticulous TIG Welded MAF Plate + PCV Bung
  • Genuine K&N Air Filter
  • Laser Cut MAF Interface Plate
  • External Mounted MAF + PCV Interfaces
  • ø102mm (4-Inch) non tapered mandrel bent piping for maximum air velocity

Includes:

  • D3 Air Intake Pipe
  • Genuine K&N Air Filter
  • D3 Aluminum Heat Shield
  • 4-Ply High Temperature Silicone Couplers
  • Stainless Steel Clamps
  • D3 Emblem

Available Finishes- BLACK

 

Quantity

Price: $395.00

Shipping:$0.00

Loading Updating cart...

D3 ULTRACOOLER Front Mount Heat Exchanger / Intercooler

D3 ULTRACOOLER Front Mount Heat Exchanger / Intercooler

D3 Max Fit Intercooler / Heat Exchanger

 

 

In the world of competitive motorsports HEAT SOAK becomes our number 1 enemy! With excessive amounts of heat cars do not perform the way they are intended to. The D3 Intercooler has been designed to eliminate all possibilities of heat soak in competition environments. The D3 ULTRACOOLER is a core product used on the entire fleet of D3 race cars ranging from 675 HP Bolt on Dragster to our 1200HP Competition Race Car.

The D3 ULTRACOOLER is the world’s only Max Fit Intercooler/Heat Exchanger developed only for the 09-11 CTS-V automobile. Engineered to support over 1000 HP the ULTRACOOLER has been designed to use the largest core possible that fits within the confines of the stock front bumper ducting. The ULTRACOOLER has the ability to efficiently flow enough air to allow for your CTS-V to make over 1000 Wheel Horsepower, and is a true bolt on that replaces the OEM heat exchanger.

The Intercooler/Heat Exchanger core provides the perfect balance between heat exchanging efficiency and air flow allowing for substantial amounts of cooling. On ultra-high boost applications (12+ PSI) we have recorded consistent temperatures of only +10° over ambient!

Features:

  • Efficient Cooling in 1000+ HP Enviroments
  • Direct Bolt On
  • No Cutting or Welding Required
  • 1 pc Construction, no clubmsy hardware to negotiate or modify
  • Bolts in place with OEM-Like Fit and Finish
  • Avionics Grade Aluminum Construction
  • Pressure Tested to 150 PSI
  • A.N. (Army/Navy) Fittings
  • High PSI Fluid Hose
  • Black D3 Logo on Right side corner

 

Quantity

Price: $1,295.00

Shipping:$0.00

Loading Updating cart...
LoadingUpdating...

D3 Intercooler Pump Upgrade

D3 Intercooler Pump Upgrade

 

The D3 Intercooler Pump Upgrade Kit further combats heat soak via an upgraded intercooler fluid pump.

 

D3 utilizes a an upgraded pump that moves 20 gallons per minute which is 11 gallons greater than the stock 9 gal per minute pump.

 

Includes:

 

  • Pump
  • High Temp Hoses
  • A.N. (Army/Navy) fittings
  • D3 Laser Cut Mounting Bracket
  • Vibration dampening bracket mounts

 

 

The D3 Intercooler Pump Upgrade Kit further combats heat soak via an upgraded intercooler fluid pump.

D3 utilizes a an upgraded pump that moves 20 gallons per minute which is 11 gallons greater than the stock 9 gal per minute pump.

Includes:

  • Pump
  • High Temp Hoses
  • A.N. (Army/Navy) fittings
  • D3 Laser Cut Mounting Bracket

Vibration dampening bracket mounts

Quantity

Price: $395.00

Shipping:$0.00

Loading Updating cart...